DECO PRIME 4 FL22 Gloss Mirror with clear lacquer on the front side
With our DECO PRIME® product range we offer you a production-ready portfolio that allows modular product design.
Download Data sheetSample order
High Gloss
Colours
C1 – Natural tone
C83 – stainless steel
C64 – Steel
C65 – Dark Steel
C61 – Special Grey
C79 – Special Dark Grey
C23 – German Silver
C22 – Gold
C25 – Brass
C26 – Dark Brass
C62 – Special Bronze
C60 – Copper
C72 – Salmon
C74 – Red
C77 – Blue
C56 – Deep Ocean Blue
C12 – black
Technical specifications
Supply form
| Coil, strip, sheet, blanks | ||
| Thickness | [mm] | 0,30 - 0,50 |
| Width up to | [mm] | 1250,00 |
Lacquer Layer
| Thickness of lacquer front side | [µm] | 9,00 ± 1,00 |
|---|
Optical Values
| Total light reflection | [%] | ≥ 85 |
|---|---|---|
| Diffuse light reflection | [%] | |
| Brightness 60° along | [-] | 75 - 85 |
| Brightness 60° across | [-] | 70 - 80 |
| Solar reflection | [-] | ≥ 85 |
Mechanical Properties
| Yield strength Rp 0,2 | [MPa] | ≥ 105 |
|---|---|---|
| Tensile strength Rm | [MPa] | ≥ 125 |
| Elongation at break A50 | [%] | ≥ 2 |
| Bending radius | 2T acc. T-Bend-Test |
Environmental Resistance
| Adhesion | [-] | T-Bend test |
|---|---|---|
| [-] | 2T | |
| [-] | Boiling Test [8h @ 98°C] | |
| [-] | no blisters, no delamination | |
| [-] | Cross Adhesion [Gt] | |
| [-] | Gt 0 | |
| UV stability | [-] | QUV-A [1000h] |
| [-] | no objectionable chalking | |
| [-] | colour-change: ΔE* <1 | |
| Corrosion Resistance | [-] | Acetic acid salt spray test [1000h] |
| [-] | < 2mm average creepage from scribe | |
| [-] | no delamination | |
| [-] | Condensation Test [3000h] | |
| [-] | no blisters, no delamination | |
| [-] | Water immersion test [500h @ 23°C] | |
| [-] | no blisters, no delamination |
Tolerances
| Thickness | [mm] | 0,30 - 0,50 ± 0,04 |
|---|---|---|
| [mm] | 0,51 - 0,60 ± 0,05 | |
| [mm] | 0,61 - 1,00 ± 0,06 | |
| [mm] | 1,01 - 1,20 ± 0,07 | |
| Width/Coil | [mm] | + 3,00 / - 0,00 |
| Width Slit Coil | [mm] | ± 0,20 standard |
| Longitudinal Curvature | [mm] | ≤ 1,00 on a measuring length of 1000 mm |
| Length | [mm] | 601 - 1500 + 1,50 / - 0,00 |
| [mm] | 2501 - 3500 + 3,50 / - 0,00 | |
| Flatness | [%] | 1 % of wavelength, max. 8 mm |
| Transversal Divergency | [mm] | ≤ 1,5 (D1-D2) |
| other tolerances on request |
Specification
| [-] | Specular gloss (60°) | |
| [-] | Colour difference | |
| [-] | Colour difference within one batch | |
| [-] | Pencil hardness | |
| [-] | Adhesion after indentation (cupping test) | |
| [-] | ||
| [-] | Determination of resistance to humidity | |
| [-] | Condensation | |
| [-] | Resistance to salt spray (fog) [1000h] | |
| [-] | Resistance to fluorescent UV light and | |
| [-] | water condensation [2000h] |
Protective Film
| Protective Film Type | [-] | PE - Film |
|---|---|---|
| Protective Film Thickness | [µm] | 50 - 60 |